MAIN ADVANTAGES OF THE MAGNETIC FORMWORK

1. Reducing the time for formwork installation (up to 70%).

2. Universal use for mass production of concrete products and individual products of all shapes on one steel production table.

3. No need for welding – formwork magnets will not damage steel production table.

4. Allows the production of radial products.

5. Low cost of a set of magnets. Short term of return on investment.

6. The main advantage of formwork magnets is that you will not need to have many different forms for a wide range of products; you will need a set of magnets, adapters for different board heights and steel production table. This will allow you produce almost any flat reinforced concrete product up to 600 mm high.

Formwork magnets are used in the production of concrete flat products at plants and at construction sites with the use of steel production tables. They are used in the production of flat products of any form up to 600 mm high, piles and columns of any length, floor slabs, road slabs, sandwich panels, beams, and other concrete products.

Magnetic formwork

The use of magnetic formworks and shuttering magnets in the construction industry is a step forward in the manufacture of precast concrete products. Permanent magnets began to be used in the production of reinforced concrete products (RCP) not so long ago. Initially, welding was used to fasten the formwork or edge forms to steel production table. However, this approach requires additional mechanical operations and personnel. In addition, in this case, the upper working surface of production tables will be damaged; emerging of shells significantly reduces quality of the reinforced concrete product surface and increases the consumption of lubricants during further proceedings.

Magnetic formwork is used to simplify production process. Magnetic formwork saves time, money and efforts in the production process due to easiness of fixing process, easy method of correction and modularity. The principle of magnetic formwork system operation is quite simple, so to start using the magnetic formwork you will need:

Operating principle of formwork magnets

When using a magnetic formwork, it is necessary to place magnet in the right place on the table and press the button upwards or activate the magnet in the prescribed way. When the button is pressed (in the case of magnet activation with a push-button), the magnet starts to work while it is securely fixed on the steel production table. For the production of reinforced concrete products of various heights, different adapters are used, which can be part of the pole piece case or attached to the pole piece case. Adapters are used to fasten the formwork board to the formwork magnet. Deactivation of the magnet is performed by lifting the button with a special tool.