What Are The Advantages of Precast Concrete Magnets?

Screws, bolts and welding processes can be avoided during the positioning process and stainless steel plates can be protected from damage;

The installation is very simpleand the positioning is very precise;

It can improve installation efficiency and reduce labour costs;

We can use them repeatedly over a long period of time, reducing material costs and ultimately shorten the payback period;

We can effectively solve the environmental pollution caused by construction, and has high safety.

Maintenance & Safety of Precast Concrete Magnets

In the process of using the precast concrete magnet, it should be prevented the use of hard tools, such as knocking, bruising, etc., causing deformation of the magnetic devices, or even damage to the magnet, so as not to affect the magnet performance. If a tool must be used, a rubber hammer is recommended for gentle tapping.

The magnetic forwork accessories should be kept clean and flat to prevent iron chips or concrete slurry from entering the inner side, which will affect the flexibility of the switch, and at the same time this may cause the magnetic block to tilt, fail to fit the platform evenly, and even reduce the suction force.

The mounting magnet is very strong, should be avoided near precision instruments, electronic instruments and other devices susceptible to magnetic influence, but also not near other ferrous materials, once adsorbed, it is difficult to separate. It is recommended to make special toolboxes for magnetic fixing devices and other magnetic holders.

The working surface of the precast magnet component should always be kept clean and flat at all times. If not used for a long time, the holding surface should be oiled to prevent rust. The magnet should be checked frequently for a smooth fit to the platform and the flexibility of the switch so that it does not interfere with normal use.

Note that the actual operating temperature should not exceed the maximum operating temperature of the Construction magnet.

For other safety tips, refer to the Rare Earth Magnet Safety Tip.

We know that precast manufacturing plants have a high demand for magnetic devices and fasteners and we are pleased to offer a variety of practical, safe and efficient magnetic solutions for this industry. We can provide our customers with high quality standardized magnetic fixtures according to different sizes and structures of side moulds. These magnetic fixtures can be used with different tooling fixtures, allowing standardized magnetic device to be used in the production of a wide range of components and in different engineering projects.