shuttering magnet Maintenance and safety instructions

(1) Prevent the damage or deformation by hard tools from Precast Concrete Magnet (shuttering magnet), It is recommended to use a rubber hammer gently tap.

(2) The platform should be kept clean and flat, to prevent iron or concrete slurry into the internal magnet, which will affect the switch flexibility and may cause magnet tilt and cannot touch the platform fully.

(3) Super strong magnetic field. Keep away from the susceptible devices such as precision instruments and electronic instruments; but also not close to other iron materials. It is recommended to place in dedicated tool box.

(4) Keep the cartridge holding surface clean and smooth, Anti-rust oil should be applied on the magnet surface, if no using long time, suction surface should be oil rust. Regular Check whether the magnet can be flat fit the platform, the switch is flexible and comfortable or not.